+86 0371 8654 9132

copper and molybdenum flotation

Optimization of a Copper/Molybdenum Flotation Circuit by ...

Optimization of a Copper/Molybdenum Flotation Circuit by Depressing Pyrite from the Rougher Flotation Stage Using Different Scheme of Reagents A thesis submitted in partial fulfillment of the requirements for the degree of Master Of Science in Metallurgical Engineering by Wander A. Valderrama Dr. Carl C. Nesbitt/Thesis Advisor May 2020

Molybdenite flotation from copper/molybdenum concentrates ...

copper flotation circuits and were taken before entering the molybdenum circuit. The Morenci copper/molybdenum concentrate analyzed 0.2%-0.4% Mo and 28%-33% Cu, while the grade of the Copperton copper/molybdenum concentrate was 2.5%-4.1 % Mo and 32%-34% Cu. The concentrates were received at 20%-35% solids. The particle size data show that the

About this site

Nov 01, 2013 · Laboratory rougher flotation tests were conducted with two samples of Cu–Mo ores in fresh water and in sea water as a function of pH. In both cases Cu recoveries were slightly lower in sea water than in fresh water for a wide range of pH (pH 7–12). Flotation of molybdenite was however strongly depressed in sea water at pH higher than 9.5.

Molybdenite flotation from copper/molybdenum concentrates ...

Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

Copper-molybdenum ore beneficiation,flotation separation ...

Sep 03, 2020 · 2.Copper-molybdenum mixed concentrate separation process . For the flotation separation of copper-molybdenum mixed concentrate, it can usually be divided into 3 steps. ① Pretreatment. The main purpose of pretreating the copper-molybdenum mixed concentrate is to remove the residual collectors in the slurry in the most reasonable and effective way.

Copper-Molybdenum ores - Danafloat - Home

Molybdenum will float naturally with the copper but can be crowded in the froth by the copper mineralization and use of a moly collector (such as diesel oil, kerosene, refined oils, pine oil or xanthate ester) enhances its floatability. Further, because optimum moly flotation pH is at 7-8 while optimum copper selectivity is typically in the 9 ...

Molybdenum Ore Processing by Flotation

May 05, 2016 · This molybdenum flotation circuit, based on 250-500 tons per 24 hours is designed for low-grade molybdenum ore having high-grade streaks and with pyrite-quartz gangue.It is also basically sound for many other friable sulphide ores, such as antimony, silver and even some lead ores. The basic ideas stressed in this moly flotation flowsheet are the importance of simplicity and the quick removal ...

About this site

The flotation separation of copper-molybdenum sulfides general ly re lies on the use of . toxic and hazardous depressants such as cyanides, sodium sulfide/hydrosulfide, Noke’s .

About this site

Flotation separation of chalcopyrite from molybdenite was studied using seaweed glue (SEG) as a depressant. Flotation process and mechanism were examined by response surface methodology, flotation tests, adsorption tests, zeta potential measurements and fourier transform infrared (FT-IR) spectra. Response surface methodology with a Box–Behnken design suggested the optimal reagent

The effect of sodium hydrosulfide on molybdenite flotation ...

Abstract Seawater is used in copper-molybdenum flotation plants when fresh water resources are limited. To minimize the negative effect of process seawater on molybdenite flotation, diluting process seawater with fresh water is a common practice. This study was designed to identify whether the dilution of process seawater in copper-molybdenum flotation plants benefits molybdenite flotation ...

Molybdenite flotation from copper/molybdenum concentrates ...

Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

FLOTATION PROCESSING OF COPPER-MOLYBDENUM ORE

molybdenum concentrate by 3,69 %, the extraction of molybdenum by 6,05 %. Keywords: copper-molybdenum ore, flotation, dispergation, concentration, extraction INTRODUCTION As the deposits are depleted and the need arises to involve poor, finely disseminated ores in processing, it becomes necessary to improve the reagent modes of en-richment of ...

Copper Molybdenum Flotation depressant - Barium Sulphate ...

Molybdenum will float naturally with the copper but can be crowded in the froth by the copper mineralization and use of a moly collector (such as diesel oil, kerosene, refined oils, pine oil or xanthate ester) enhances its floatability. Further, because optimum moly flotation pH is at 7-8 while optimum copper selectivity is typically in the 9 ...

Isolation and characterization of lost copper and ...

The importance of flotation separation has long been, and continues to be, an important technology for the mining industry, especially to metallurgical engineers. However, the flotation process is quite complex and expensive, in addition to being influenced by many variables. Understanding the variables affecting flotation efficiency and how valuable minerals are lost to the tailings gives ...

Mineralogical Prediction on the Flotation Behavior of ...

The flotation parameter and the blending ratio of copper-molybdenum ore were dictated by the condition of the real flotation plant, thus, the only variable to be investigated is the effect of mineral composition of each copper-molybdenum ores.

Nitrogen Gas Molybdenum Flotation from Copper Concentrate

Sep 03, 2018 · The copper concentrator produces 1050 mt/day of bulk Cu-Mo concentrate averaging 27% Cu and 0.6% Mo. Molybdenum plant feed is thickened to 62% solids and stored in two 150 cubic meter tanks. Two identical flotation circuits are fed from a constant head tank through changeable orifice plates thus maintaining steady feed rates.

Recent progress on research of molybdenite flotation: A ...

Sep 01, 2021 · Molybdenum is an important alloy element for metallurgical industry because of its high temperature stability. As the major mineral reserve for molybdenum, molybdenite (MoS 2) is commonly found in porphyry copper deposits.Molybdenite is naturally floatable and can be separated from copper sulfide mineral using froth flotation.

(PDF) Selective separation of copper-molybdenum sulfides ...

The flotation separation of copper-molybdenum sulfides general ly re lies on the use of . toxic and hazardous depressants such as cyanides, sodium sulfide/hydrosulfide, Noke’s .

The Effect of Seaweed Glue in the Separation of Copper ...

Flotation separation of chalcopyrite from molybdenite was studied using seaweed glue (SEG) as a depressant. Flotation process and mechanism were examined by response surface methodology, flotation tests, adsorption tests, zeta potential measurements and fourier transform infrared (FT-IR) spectra. Response surface methodology with a Box–Behnken design suggested the optimal reagent

The effect of sodium hydrosulfide on molybdenite flotation ...

Abstract Seawater is used in copper-molybdenum flotation plants when fresh water resources are limited. To minimize the negative effect of process seawater on molybdenite flotation, diluting process seawater with fresh water is a common practice. This study was designed to identify whether the dilution of process seawater in copper-molybdenum flotation plants benefits molybdenite flotation ...

Selective depression effect in flotation separation of ...

Sep 01, 2015 · It is usually associated with copper sulfide ore as a trace mineral [1−3]. In the flotation of copper−molybdenum sulfide ores, two methods are widely used: 1) the bulk copper− molybdenum flotation, followed by copper− molybdenum separation; 2) the sequential flotation of the copper and molybdenum sulfide minerals.

(PDF) A study of mechanisms affecting molybdenite recovery ...

A study of mechanisms affecting molybdenite recovery in a bulk copper/molybdenum flotation circuit. International Journal of Mineral Processing, 2009. William Skinner. Massimiliano Zanin. Stephen Grano. I. Ametov. Liqun ZHOU. Download PDF. Download Full PDF Package. This paper.

Copper Molybenum Beneficlation

Sep 03 2020 1.Status of copper-molybdenum ore beneficiation. Based on the overall structure of porphyry copper-molybdenum deposits there are usually three types of minerals in symbiosis namely copper molybdenum and sulfur. It should be pointed out that because of the relatively low grade of molybdenum ore its output is a mixture of copper and molybdenum.

Modified reagent mode in porphyry copper-molybdenum ore ...

Test data on the selective reagent modes at bulk flotation cycle and modified carboxymethylcellulose (CMC) at a selection cycle for the bulk copper-molybdenum concentrate. The selected reagent mode at a bulk flotation cycle with industrial kerosene and Beraflot as collectors and OPSB as a frother made it possible to recover 87 % of copper and 82 % of molybdenum into a rough bulk concentrate ...

Worlds largest flotation cells improve copper and ...

Oct 25, 2018 · Outotec TankCell e630 flotation unit. Its large capacity makes the Outotec TankCell e630 particularly suitable for rougher and scavenger duties in copper, copper-molybdenum, gold and other base metal applications. The unit has a diameter of 11

Mineralogical Prediction on the Flotation Behavior of ...

The flotation results show that the recovery of copper and molybdenum decreased with the increasing copper oxidization degree. In addition, the recovery of blended ore can be predicted via the flotation rate equation, using the maximum recovery ( R max ) and flotation rate coefficient ( k ) determined from the flotation rate analysis of each ...

A Study on Dexing Copper-Molybdenum Flotation Separation ...

The inhibitor was high consumption of low-efficiency of depressant in the separation of copper- molybdenum is bottleneck, which restricts the improvement of the Cu-Mo separation technology. This paper study the Dexing copper-molybdenum flotation separation by using a new small molecule inhibitors named pseudothiohydantoin(DLC) and single-factor experiments were employed to

Molybdenum Flotation - Froth Flotation (Sulphide & Oxide ...

This stage in bulk flotation of copper-molybdenum and usual reagents are utilized. According to Paul Ramdohr (1980, The Ore Minerals and Their Intergrowths, Page 878) Jordisite is MoS2 amorphous to X-Rays, which occurs in semi metallic masses of anthracitic aspect in low temperature deposits; e.g. Bleiberg in Carinthia, and forms there the base ...

US4083921A - Purifying molybdenum flotation concentrates ...

Copper, iron, and lead impurities are removed from molybdenum flotation concentrates by mixing the feed concentrates with a nonvolatile chloride salt, heating the mixture to a temperature of from about 200° to 350° C for a time sufficient to activate the lead impurities in the concentrates so that they can be leached therefrom during the subsequent leach step, and leaching copper, iron, and ...

INVESTIGATION OF EFFECTIVE PARAMETERS FOR

copper–molybdenum flotation, and reviews most of the published applications. Section 2 gives a description of the industrial plant briefly. The materials and methods are introduced in Section 3. Finally, Section 4 analyzes the effect of some of the factors on the flotation of molybdenum and copper.

US4268380A - Froth flotation process - Google Patents

An improvement in the froth flotation separation of metallic sulfide mineral ores, particularly those ores bearing copper and molybdenum, in which a mercaptan collector is used in an earlier primary flotation stage, the improvement comprising the addition of activated carbon to achieve deactivation of the mercaptan collector prior to the component mineral separation stage, thereby providing ...

Molybdenum Processing - IMOA

Flotation separates the metallic minerals from the gangue this way and – in the case of copper/ molybdenum ores – separates molybdenite from copper sulphide. The resulting MoS 2 concentrate contains between 85% and 92% MoS 2. Further treatment by acid leaching can be used to dissolve impurities like copper and lead if necessary.

Los Bronces Copper and Molybdenum Mine - Mining

The slurry undergoes froth flotation for separating the copper and molybdenum concentrates. The concentrate is dried by thickening and filter press till the water content is reduced to 9%. The concentrates are either directly sold in the market or transported to the Charges smelter for the production of copper anodes.

Copper Molybenum Beneficlation

Sep 03 2020 1.Status of copper-molybdenum ore beneficiation. Based on the overall structure of porphyry copper-molybdenum deposits there are usually three types of minerals in symbiosis namely copper molybdenum and sulfur. It should be pointed out that because of the relatively low grade of molybdenum ore its output is a mixture of copper and molybdenum.

COPPER SUPER CONCENTRATE PRODUCTION

of copper “head” and individual flotation of sand and slime frac-tions. Based on the research findings, a copper concentrate perfec-tion chart has been recommended and is currently used by PP. The offered approach can be extended for similar mineral process-ing plants. In dressing of copper–molybdenum ore where copper is repre-

Wemco 1+1 Inert Gas: Optimised for molybdenum/copper

The ideal flotation machine for your mining operations will deliver high recovery and grade with easier start-up, simpler operation, lower reagent consumption, longer mechanism life and less required maintenance. The WEMCO 1+1 Inert Gas provides such a solution, that is specifically tailored to molybdenum/copper separation.

Molybdenum Flotation Gold

Copper and molybdenum flotation process is commonly used for copper and molybdenum ore with pretty high grade while it's rarely adopted in industrial production In part combined flotation process molybdenum with high floatability will be concentrated first and then copper and molybdenum combined concentrate are concentrated together .

Molybdenum Ore Flotation

Molybdenum ore flotation process,mineral ore Molybdenum ore flotation process: Molybdenum ore dressing methods mainly flotation process, recovery of molybdenum minerals is molybdenite. Get Price; Molybdenum Wikipedia. Molybdenum is a chemical